| | |
 | Injector Analyser(Reference #DX.111)
A top quality injector tester designed for the fuel injection specialist or discerning diesel workshop and suitable for a variety of cars, commercial and agricultural vehicles.
Tests for nozzle opening pressure, back leakage, seat tightness, chatter and spray conditions
Solid cast aluminium body with integral reservoir and filter
0-420 bar/0-6000 1bf/in2 gauge
Supplied with quick action M12 x 1.5 adapters
Perspex arrester for oil recovery and safe spray observation
Complete set of instructions included
Wide range of adaptors
Click for List of Adaptors
|
| |
|
Compression Tester(Reference #DX.511)
A compression tester designed specially for the diesel car and light commercial vehicle market.
Coverage of more than 60 current vehicle types
Suitable for running or cranking tests
0-1000 1bf/in2 (0-70 bar) range
Supplied with adapters: two glow plug types (Part No. DA102-85 for M12 and DA 102-90 for M18) and two injector types (24mm screw-in Part No. DA102-93 and clamped type Part No. DX102-109)
Complete set of user instructions
For Full range of adaptors,
Click for List of Adaptors
|  |
| |
|
 | Cylinder Leakage Tester(Reference #DX.520)
Cylinder leakage tester for petrol or diesel cars and light commercial vehicles
Designed to locate the source of cylinder compression losses quickly and accurately without removing the cylinder head.
Quantifies compression losses quickly and accurately
Indicates source of problem e.g. Valves, head gaskets, piston rings etc.
Essential for a cost-effective workshop.
Contains adapters for diesel injectors (24mm screw-in and clamped types), diesel heater plugs (12 and 18mm) and petrol engines spark plugs (14 and 18mm)
Wide range of additional adapters also available
Click for List of Adaptors
|
| |
|
Injector Tester(Reference #DX.710)
Suitable for a variety of cars, commercial and agricultural vehicles, this highly sophisticated miniature injector tester is a superb diagnostic aid.
Tests for nozzle opening pressure, back leakage, seat tightness, chatter and spray condition
May be used hand held, vice held or fitted to an injector 'in situ'
0-350 BAR (0-5000 1bf/in2) range
Integral oil reservoir
Supplied with M12 x 1.5 and M14 x 1.5 connectors
Ideal for low budget workshop
Supplied with complete set of operating instructions
|  |
| |
|
 | Fuel Supply Tester(Reference #DX.720)
Tests for fuel starvation problems on diesel cars and vans fitted with rotary fuel injection pumps.
Essential equipment for servicing diesel cars
Checks transfer pump efficiency, tests for blocked filters or fuel lines
High resolution 0 to -1 bar vacuum gauge
1 meter long flexible connection pipe
Quick action banjo and end-on connectors - suitable for CAV and Bosch rotary injection pumps with M10 x 1.25 and M12 x 1.5 threads, and fuel filters with M14 x 1.5 banjo connections
Supplied with complete set of instructions
|
| |
|
Vacuum/Pressure Generator(Reference #DX.760)
A hand-operated pump which can generate 20"Hg (-0.7 BAR) vacuum or 1.4 BAR (20psi) pressure to check vacuum and pressure systems.
Tests
Diesel and petrol fuel systems
Turbo charged waste gates
Distributor advance mechanisms
Emission control systems
Bleeds Automotive brake systems
Diesel fuel systems
|  |
| |
|
 | Glow plug and circuit tester(Reference #DX.900)
An innovative tester designed to evaluate the performance of 12 volt (parallel wired) glow plugs, in or out of engine, and check supporting circuitry
Tests glow plugs for current draw, continuity, and short circuit - 30 amp range
Checks circuitry continuity, relay and warning light operation, Built-in 'hot test' chamber with viewing window, LED timer system
Short circuit trip
Supplied in protective pouch complete with set of operating instuctions
Adapter (DX900-3) available for 6 Volt glow plugs
|
| |
