| | |
 | In-Line Pre Filter(Reference #FILT0043)
In-Line Pre-Filter
Supplied Individually
Fits all 290/295 Variants
|
| |
|
Secondary Filter(Reference #FILT0040)
Secondary Filter (Borosilicate Glass Fibre)
Supplied individually
Fits all 290/295 Variants
|  |
| |
|
 | Oxygen Sensor(Reference #TRDU0067)
Oxygen Sensor (3 pin header type)
Fits all 285/290/295 Variants
|
| |
|
Sample Hose(Reference #SP8)
Complete Sample Hose Assembly
Fits all 285/290/295 Variants
|  |
| |
|
 | Temp Probe (Petrol)(Reference #TMP6)
Temperature probe for 290AU-HISPEC
|
| |
|
Sample Probe End(Reference #SP8X)
Replacement end for Sample probe SP8
Fits all 290/295 Variants
|  |
| |
|
 | Temp Probe (Petrol)(Reference #TMP7)
Temperature probe for 290EN2 Gas analyser post-4/98
(For 290AU-HISPEC pre 4/98 use TMP6)
|
| |
|
Sample Probe Handle(Reference #SP8H)
Replacement Sample Probe Handle
Fits all 290/295 Variants
|  |
| |
|
 | Temp Probe End(Reference #DX210-26)
Oil Temperature Probe End
Used on STP600-EN320, STP620-EN320 & STP620-EN420
|
| |
|
Oil Temp Cable(Reference #DX210-37)
Cable to link Diesel Temperature Probe to STP600-EN320, STP620-EN320 & STP620-EN420
|  |
| |
|
 | Red Probe(Reference #HTP3)
Tach Pickup lead for use with all Crypton Petrol
Emission Analysers
Replaces HTP1+HTL3 or HTP4
|
| |
|
Coil Tach Adapter(Reference #XDIS26)
Universal Engine speed adaptor
For use with HTP1, HTP3 or HTP4 to allow speed pickup where HT leads are not visable
|  |
| |
|
 | Primary Filter & Bowl Assy(Reference #FILT0038)
Primary Filter Assembly with Bowl
Fits 290AU-Hi-Spec Only
|
| |
|
Secondary Filter & Bowl Assy(Reference #FILT0039)
Secondary Filter Assembly with Bowl
Fits 290AU-Hi-Spec Only
|  |
| |
|
 | Pre-Filter(Reference #FILT0037)
In-Line Pre-Filter
Supplied Individually
Fits 285 Only
|
| |
|
Primary-Filter(Reference #FILT0026)
Primary-Filter
Supplied Individually
Fits 285 Only
|  |
| |
|
 | Secondary-Filter(Reference #FILT0027)
Secondary-Filter
Supplied Individually
Fits 285 Only
|
| |
