Jacking Beam

Jacking Beam - Crypton Technology
Jacking Beam - Crypton Technology
Jacking Beam - Crypton Technology
Jacking Beam - Crypton Technology
Crypton supply a 2 tonne and 2.8 tonne jacking beams for classes IV and VII.

All Crypton jacking beams are roller mounted to run smoothly and safely along the platform and positioned low on the lift for clear vehicle access. On the class VII scissor lift, it is positioned under the platform, preventing the buildup of debris and offering a smooth movement and longer bearing life.

The support arms slide freely in the jacking beam frame to accommodate any sideways movement of the lift platforms. Rubber topped lifting pads are supplied as standard and fit anywhere over the length of the beam.

Description

Features

  • Rubber topped lifting pads
  • Designed to fit Crypton lifts
  • Finger protection
  • Two level safety catch to provide a stable work platform in case of accidental lowering
  • Fully extendable arms
  • Roller mounted for a smooth effortless movement
  • Positioned low for clear vehicle access
  • Adjustable rubber topped lifting pads
  • Finger guard fitted as standard

Class VII NT Scissor Lift:

  • Jacking bam runs under the lift platform
  • Prevents buildup of debris
  • Smooth movement
  • Long bearing life

Technical Specifications

ProductManualAir
Lift/Pit 4-Post 4-Post Lift Pit Lane Pit Lane Scissor Scissor
Class IV VII IV VII IV VII
Lifting Capacity 2.0 2.8 2.0 2.8 2.0 2.8
Weight (kg) 87 87 87 87 113 113
Air pressure - bar - - - - 6-8.5 6-8.5
Air flow - - - - 0.42 0.42
Hydraulic pressure - bar 248 248 248 248 152 152

Downloads

MOT Bay and ATL Brochure 2017 >>>>

Jacking Beam Manual >>>>

Product Codes

ProductDescription
Jacking Beam
A2C96360000 Class IV Jacking Beam (Air / Hydraulic)
  2000kg capcity for use with CSL640/CSL641 Scissor Lift.
A2C96360100 Class IV Jacking Beam (Manual)
  2000kg capcity for use with CSL640/CSL641 4 post Lift
A2C96360200 Class IV Jacking Beam (Manual)
  2000kg capcity for use with pit installation
A2C96360300 Class VII Jacking Beam (Air / Hydraulic)
  2800kg capcity for use with CSL670/CSL671 Scissor Lift.
A2C96360400 Class VII Jacking Beam (Manual)
  2800kg capcity for use with CSL670/CSL671 4 Post Lift
A2C96360500 Class VII Jacking Beam (Manual)
  2800kg capcity for use with pit installation
A2C87879000 95mm Riser Block (each) - 2 x required
A2C89395000 180mm Riser Block (each) - 2 x required

Get in touch

phone
+44 (0)844 665 7613
fax
+44 (0)844 665 7604
36 Gravelly Industrial Park, Birmingham, B24 8TA
 
 
 
 
Back to top